Abrasion/Mechanical Bundling

download-abrasion

Product
Description
Product
(Click photo for datasheet)
Flammability Halogen
Free
Temp.
Rating
Design Construction Available
Sizes
A lightweight solution that provides abrasion protection in areas within close proximity to fluid lines or in space applications where low outgassing is required. FAR 25 § 853 -60°C to + 175°C
(-76°F to +347°F)
Wrappable

Material: Polyphenylene sulfide (PPS)

Color: Black with a white tracer

5 to 38 mm
(3/16" to 1-1/2")
A water repellent, flexible solution that provides excellent abrasion and cut-through resistance. Qualified to ASD EN6049-006 and BMS 13-81 Type 1. FAR 25 § 853 -60°C to + 200°C
(-76°F to +392°F)
Wrappable

Material: Nomex® and PPS

Color: Green

5 to 40 mm
(3/16" to 1-1/2")
Designed with a pink tracer to identify fuel lines, as well as an ivory tracer to indicate maximum operating diameter; water repellent. Qualified to ASD EN6049-006. FAR 25 § 853 -60°C to + 200°C
(-76°F to +392°F)
Wrappable

Material: Nomex® and PPS

Color: Green with a pink tracer

5 to 40 mm
(3/16" to 1-1/2")
Designed with a violet tracer to identify fiber optics, as well as an ivory tracer to indicate maximum operating diameter; water repellent. Qualified to ASD EN6049-006. FAR 25 § 853 -60°C to + 200°C
(-76°F to +392°F)
Wrappable

Material: Nomex® and PPS

Color: Green with a violet tracer

5 to 40 mm
(3/16" to 1-1/2")
Designed to identify wire harnesses connected with test equipment taken onboard airplanes; water repellent. Qualified to ASD EN6049-006. FAR 25 § 853 -60°C to + 200°C
(-76°F to +392°F)
Wrappable

Material: Nomex® and PPS

Color: Orange

5 to 40 mm
(3/16" to 1-1/2")
Designed to identify wire harnesses connected with weapon systems; water repellent. Qualified to ASD EN6049-006. FAR 25 § 853 -60°C to + 200°C
(-76°F to +392°F)
Wrappable

Material: Nomex® and PPS

Color: Red

5 to 40 mm
(3/16" to 1-1/2")
Designed with a sewn loop textile attachment method which, in conjunction with an adhesive hook, enables attachment of the wire harness directly to the aircraft structure thus reducing the space needed between the wire harness and the structure. FAR 25 § 853 -60°C to + 200°C
(-76°F to +392°F)
Wrappable

Material: Nomex® and PPS

Color: Green with natural loop attached

5 to 40 mm
(3/16" to 1-1/2")
Fray-resistant and flame retardant solution used for abrasion protection over a range of temperature environments. FAR 25 § 853, VW-1   -70°C to + 150°C
(-94°F to +302°F)
Tubular

Material: Halar® (E-CTFE) fluorpolymer

Color: Black with white tracer or white with black tracer

3 to 64 mm
(1/8" to 2-1/2")
Optimal solution for use where a combination of abrasion protection and lightweight properties are required. FAR 25 § 853, VW-1 - 70°C to + 200°C
(-94°F to +392°F)
Tubular

Material: PEEK and PPS

Color: Black or natural

3 to 64 mm
(1/8" to 2-1/2")
Designed for mechanical protection in high temperature areas.  Often used for its outstanding properties in extreme environments. FAR 25 § 853, VW-1 - 70°C to + 200°C
(-94°F to +392°F)
Tubular

Material: PPS

Color: Black or natural

3 to 45 mm
(1/8" to 1-3/4")
Low flammability and resists damage from most chemicals. Features an open-braid construction, making the product highly flexible and resistant to trapping water, heat, and humidity.  Qualified to ASD EN6049-003. FAR 25 § 853, VW-1 - 60°C to + 240°C
(-76°F to +464°F)
Tubular

Material: Nomex®

Color: Green and natural

2 to 30 mm
(1/16" to 1-3/16")
Designed for mechanical protection in temperature extremes and hostile conditions. FAR 25 § 853 - 70°C to + 260°C
(-94°F to +500°F)
Tubular

Material: PEEK

Color: Black or natural

3 to 64 mm
(1/8" to 2-1/2")
Designed for mechanical protection, has low flammability and resists damage from most chemicals.  Qualified to BMS 13-52 Type IV. FAR 25 § 853   - 70°C to + 260°C
(-94°F to +500°F)
Tubular

Material: PFA

Color: Natural

3 to 32 mm
(1/8" to 1-1/4")
Provide good fluid resistance and are ideal for sealing, connecting, and finishing cut ends. Also available with fiberglass reinforcement for increased mechanical strength. FAR 25 § 853   - 60°C to + 250°C
(-76°F to +482°F)
Flat

Material: Unsupported or supported with fiberglass silicone tapes

Color: Black and red

Maximum elongation ranges from 200% to 500%.  Multiple widths and thicknesses available.
Flat braided textiles that feature outstanding chemical and thermal stability, are fray resistant and have a high breaking strength. TG series conforms to CID A-A-52083 Finish D.     - 55°C to + 1100°C
(-67°F to +2012°F)
Flat Available in Teflon coated fiberglass, Nomex®, or ceramic fibers Available in various widths
Screen Shot 2018-04-05 at 10.20.15 AM